|
Chink-Paint
Change the Color of your Chinking
Chink-Paint is an elastomeric, textured coating for renewing or changing the color of chinking. This makes it ideal for giving a facelift to your home by brightening the appearance of old, dirty chinking or altering the color of existing chinking.
Chink-Paint’s elasticity enables it to expand and contract with Perma-Chink or Energy Seal without cracking or peeling.
- UV Stable
- Refreshes appearance or changes the color of chinking
- Won't crack or peel
- Chink Paint colors exactly match Perma-Chink chinking
Color swatch sample cards are available below to help you make your color decision. |
Chink-Paint Specifications
Shelf Life |
|
Application Temperature |
-
40o to 90o
- Do not freeze!
|
Application Methods |
|
Surface Preparation |
|
Frequency |
|
Drying Time |
|
Shelf Life |
|
To view and/or print MSDS sheets or labels you need Acrobat Reader. If you don't have Acrobat Reader installed on your computer,
click here
for a free download.
| Coverage Rate per Gallon |
2" Joint |
600 lineal feet |
3" Joint |
400 lineal feet |
4" Joint |
300 lineal feet |
|
Chink-Paint Application Instructions
(Printer Friendly Version Here)
Using Chink-Paint is often helpful in giving a “face-lift” to log homes. In the past when applying maintenance coats of stain (which can discolor synthetic chinking), it was necessary to mask off the chink joint or do a tedious brush application of the stain. Now, using Chink-Paint, you can spray apply any LIFELINE stain over chinking, log and all. After the stain has dried you can then go back and brush apply the Chink-Paint to the joints -- a real labor and time saver.
Application Tips
- Chink-Paint should be thoroughly stirred before use and occasionally during use.
- Use a synthetic bristle brush slightly smaller than the joint size to be painted. Cut the bristles to about 1½ to 2 inches long.
- Use a piece of cardboard or stiff paper to protect stained logs as you paint the chinking.
Application Instructions
The substrate should be clean, free of oils or water repellents and completely dry before application. Any dirt or discolorations should be removed with Wood ReNew or a solution of Log Wash™. Thoroughly rinse and allow to dry before applying Chink-Paint.
Do not apply when the temperature is below 40° F or above 90° F. Apply the Chink-Paint with a short bristled brush being sure to cover all of the underlying chinking. Any spills, drips or runs should be cleaned up immediately with soap and water or a wet cloth.
Coverage Rate -
Approximately 100 - 125 sq. ft. per gallon.
Cleanup - Clean tools and brushes with soap and water.
Storage - Store unused portion in tightly sealed container away from high heat or freezing temperatures. Keep out of reach of children and pets.
© Perma-Chink Systems, Inc. 10/2007 |
