|
UV Boost
Additional Protection for high-exposure areas
Add UV Boost to the first coat of Lifeline finish for additional UV protection. Developed for high UV exposure locations, it is also a recommended additive for clear interior finishes. (Note: a full dose of UV Boost has already been added to Ultra 2, our premium exterior stain.) |
UV Boost Specifications
Shelf Life |
|
Application Temperature |
|
Special Instructions |
- Shake container of UV Boost
- Add entire contents to the appropriately sized full container of stain or finish
- Any stain containing UV Boost that is left over once the initial coat is applied may be used for subsequent coats. Just be sure to “box” the remaining stain to assure a uniform color
|
To view and/or print MSDS sheets or labels you need Acrobat Reader. If you don't have Acrobat Reader installed on your computer,
click here
for a free download.
|
UV Boost Instructions
(Printer Friendly Version Here)
For use only in water-based stains and finishes produced by Perma-Chink
Systems, Inc.
UV Boost provides an extra measure of protection against stain fading due to UV
radiation in regions subject to high intensity sunlight.
UV Boost is only effective when used in the first coat of stain or finish
applied to bare wood. It is not effective when added to topcoats or stains
applied over an existing finish. UV Boost can be used in both interior and
exterior applications. When used in the first coat of interior finishes it will
reduce the “picture frame” effect on walls and floors.
Directions for Use
Shake container. Add the entire contents to a full appropriate size container
of stain or finish. Shake or stir well after addition. Follow the labeled
application directions for the stain or finish.
© Perma-Chink Systems, Inc. 04/2007
|
