Lifeline Exterior Specifications

• MSDS
• Lifeline Exterior Label
• LIFELINE Application Guide

To view and/or print MSDS sheets or labels you need Acrobat Reader. If you don't have Acrobat Reader installed on your computer, click here for a free download.

Lifeline Exterior Application Instructions

(Printer Friendly Version Here)

Application Tips

• Apply only to surfaces that have been washed clean within the previous week. We recommend a light washing with Log Wash a day or two before staining.
  LIFELINE EXterior is most easily applied with an airless sprayer but back brushing is required.
• Apply thin coats. LIFELINE EXterior is a transparent stain, not a paint.
• Wait until the first coat is dry before applying the second coat.

Application Instructions

STEP #1: INSPECTION
Check for deterioration and decay. Remove and replace or repair deteriorated wood. Unsound wood should be repaired prior to applying LIFELINETM EXterior. Contact any Perma-Chink Systems office for information about wood repairs.

STEP #2: SURFACE PREPARATION
All surfaces should be free from mill glaze and contaminates including dirt, dust, mold and mildew, old finishes, water repellents and wax. Use appropriate materials to clean and prepare surfaces. Request a copy of “Caring For Your Dream Home” from any Perma-Chink Systems office for information about cleaning and/or removing existing finishes from your logs. If a wood preservative has been previously applied, make sure it is completely dry before applying LIFELINE EXterior. If the surface is tacky or there are visible deposits on the wood, wash the surface with water and allow to dry. DO NOT USE LIFELINE EXterior ON SURFACES THAT HAVE BEEN BRUSHED OR RUBBED WITH STEEL WOOL. IF YOU DO, RUST SPOTS MAY APPEAR UNDER THE FINISH. If more than a week has passed since the surface has been stripped or cleaned, wash down the logs with a solution of Log Wash, rinse well and allow to dry before applying LIFELINE EXterior.

If the surface has been media blasted or if the wood is rough and/or porous, apply a coat of After Blast™ Surface Sealer prior to the LIFELINE EXterior application. This will ensure proper color generation and add an extra measure of protection to the wood.

STEP #3: APPLICATION
COVERAGE RATE – Coverage is approximately 350 – 450 square feet per gallon for the first coat and approximately 600 – 800 square feet per gallon for subsequent coats depending on wood type and porosity. DO NOT USE THINNERS.

STIR THOROUGHLY before and regularly during use. Wear rubber gloves to avoid stains to the skin and fingernails. If multiple containers are used on the job, they should be poured together to ensure color consistency. LIFELINE EXterior can be applied with a brush or airless sprayer. DO NOT APPLY TO HOT SURFACES OR IN DIRECT SUNLIGHT. Do not apply when the surface temperature is below 40° F or above 90° F. Back brushing is required to work the finish into the wood for optimum performance. Always keep a “wet edge” to avoid lap marks.

LIFELINE EXterior is unlike paints or oil-borne stains. It should always be applied in thin coats. Wait for the first coat to dry (at least two hours depending on temperature and humidity) then apply a second coat. Always back brush to ensure even coverage and to avoid visible drips and runs. Once the LIFELINE EXterior has dried and you are satisfied with the appearance, we strongly recommend the application of one or two coats of LIFELINE ADVANCE Gloss or Satin clear topcoat. LIFELINE ADVANCE exterior clear topcoats enhance the beauty of the finish and play a significant role in protecting the wood against water, mold, and UV light, thus extending the life of the stain. Follow the product application directions when applying any topcoat.

STEP #4: CLEANUP
Clean area and equipment immediately with warm, soapy water. For sprayers and other commercial equipment, follow the manufacturer’s directions. For removing LIFELINE EXterior that has dried, soften with alcohol or mineral spirits and then clean with warm water. Please do not pollute our environment. Dispose of containers and unused material in accordance with local, state, and federal regulations.

STEP #5: MAINTENANCE
Periodic cleaning with an appropriate cleaner such as Log Wash™ helps extend the life of the finish and accentuates the beauty of your home. We recommend that log walls be washed down at least twice a year. Wood checking, cracking and shrinkage may eventually expose unprotected wood. Apply periodic maintenance coats as needed paying special attention to the south and west sides of the home as they may have greater exposure to the elements.

STEP #6: STORAGE
Store LIFELINE EXterior out of direct sunlight and protect from freezing. Although LIFELINE EXterior is freeze-thaw stable, if the product is accidentally frozen, allow to thaw, mix well and check for suitability of use before applying.

Request a copy of “Caring For Your Dream Home” from any Perma-Chink Systems office for additional information about applying and maintaining LIFELINE stains and finishes.

© Perma-Chink Systems, Inc. 04/2007